Made from clear non-toxic ABS and PVC
Nebulizer at angles up to 45 to accommodate special
Nebulizer with mouth piece
Made from clear non-toxic ABS and PVCNebulizer at angles up to 45° to accommodate specialtreatment requirements.
Atomization rate 0.3 ml/min.Drive flow 4 to 8 LPM
42300106 6ml Jar with mouth piece,7ft oxygen tubing,shout breathing circuit
42300006 6ml Jar with mouth piece,7ft oxygen tubing
42300020 20ml Jar with mouth piece,7ft oxygen tubing,shout breathing circuit
42400020 20ml Jar with mouth piece,7ft oxygen tubing
Instruction for use
- Place the prescribed medication into the nebulizer jar.
- Carefully snap the lid over the jar.
- Connect one end of the supply tubing to the small stem at the bottom of the nebulizer.
- Attach the nebulizer to the mask inlet or Tee-piece & Mouth piece.
- Connect the remaining end of the supply tubing to the desired pressure source.
- Set oxygen flow to 5-6LPM and check for flow through the device
- For single patient use only.
- Not intended for reprocessing.
- Avoid freezing and excessive heat.
- Be sure all connections are secure